LiteWELD XR Pro — flagship professional equipment in the "handheld laser welding" segment
- Expanded welding capabilities compared to the previous LiteWELD XR generation
- Includes dynamic wobble function for improved weld quality
- New features:
- Increased steel penetration depth up to 10 mm
- High-quality welding of AMg and AMts aluminum up to 8 mm thick
- Full penetration of copper, brass, and bronze up to 4 mm thick
- New control board — welding automation made even easier!
Comparison of LiteWELD XR and LiteWELD XR Pro Welding Capabilities
| Maximum Penetration Depth, mm | ||
| LiteWELD XR | LiteWELD XR Pro | |
| Stainless Steel | 6 | 10 |
| Low-Carbon Steel | 6 | 10 |
| Titanium, Nickel Alloys | 6 | 8 |
| AMts Aluminum | 6 | 7-8 |
| AMg Aluminum | 6 | 7-8 |
| Copper, Brass, Bronze | 2 | 4-5 |
Dynamic Wobble — unique functionality of LiteWELD XR Pro
The standard (linear) wobble — the beam lingers at the edges during direction changes. As a result, with the desired weld width and oscillation frequency, the edges may melt more while the center may remain under-penetrated, giving the weld a “tooth-like” appearance.
The dynamic wobble — beam oscillations vary in frequency and amplitude, resulting in a more stable penetration and better filler wire melting.
Dynamic Wobble — Advantages
- Improved weld strength: more even penetration profile and increased depth
- Reduced porosity
- Ability to increase wire feed speed (i.e., increase welding speed)
- Enhanced lap joint strength
Laser Cleaning Function
The cleaning function prepares weld edges before welding, reducing porosity caused by surface contamination. It also removes soot and heat-tint colors from the weld seam. Both welding and cleaning are performed on the same equipment without long reconfiguration, thanks to pre-set modes, improving appearance and reducing post-processing costs.
Laser Cutting Function
Using LiteWELD instead of a traditional angle grinder offers several advantages. The availability and ease of mode switching save time and reduce equipment damage caused by debris on the fiber. This makes the cutting process more efficient and reliable, eliminating risks of device failure due to fiber contamination when changing the gun.
Materials Welded by VPG LiteWELD XR Pro
Stainless Steel
Single-pass welding up to 10 mm
Double-pass welding up to 20 mm
Low-Carbon Steel
Single-pass welding up to 10 mm
Double-pass welding up to 20 mm
Nickel Alloys
Single-pass welding up to 8 mm
Double-pass welding up to 16 mm
Aluminum Alloys
Single-pass welding up to 8 mm
Double-pass welding up to 16 mm
Copper Alloys
Single-pass welding up to 4 mm
Double-pass welding up to 6 mm
Titanium Alloys
Single-pass welding up to 8 mm
Double-pass welding up to 16 mm
Galvanized Steel
Single-pass welding up to 10 mm
Double-pass welding up to 20 mm
Carbon Steel
Single-pass welding up to 10 mm
Double-pass welding up to 20 mm
Value Kit
| Kit Contents | Standard Package | IRS Package |
| Base unit with welding gun |  |
|
| Laser safety glasses | |
|
| Set of replacement protective lenses | |
|
| Set of replacement nozzles for various joints | |
|
| Wire feed mechanism |  |
|
| Wire feed bracket | |
|
| Connection accessories kit | |
|
| Free delivery and training | |
|
Kit Benefits
Standard Kit
1. Base unit with air cooling
2. Laser safety glasses
3. Set of replacement protective lenses
4. Set of replacement nozzles
Wire Feed Mechanism
The wire feed mechanism is fully compatible with the VPG LiteWeld 2000, operating automatically and controlled by the laser welding device. Feed modes: 2-stroke / 4-stroke. Wire feed speed: 0–800 cm/min. Compatible with wire diameters 0.8 mm, 1.0 mm, 1.2 mm, and 1.6 mm.
Wire Feed Bracket
Compatible with the wire feed mechanism and its channel, and can be used with various wire tips. Compact and ergonomic design allows welding in hard-to-reach areas.
Connection Accessories Kit
Complete set of wires, fittings, and accessories for connecting the laser welding device and feed mechanism. Includes rollers for wire of various diameters and replacement welding tips.
Free Delivery and Training
Delivery and detailed training on device operation, plus full electronic knowledge base included.
Comparison of VPG LiteWELD XR Pro and Traditional Welding
Example of Aluminum Welding
Payment Terms and Methods
We offer flexible payment terms tailored to the specifics of each transaction to ensure convenience and reliability of cooperation.
Payment is made by bank transfer based on the issued invoice.
For equipment in stock
If equipment installation is required:
90% — advance payment upon contract signing.
10% — upon equipment readiness for shipment from the Moscow warehouse.
If equipment installation is not required:
100% — advance payment upon contract signing.
Note: Individual payment terms are possible. We are always open for discussion!
For custom equipment orders
If equipment installation is required:
50% — advance payment upon contract signing, guaranteeing production reservation for your order.
40% — upon equipment readiness for shipment from the Moscow warehouse.
10% — after successful equipment commissioning at your production facility.
If equipment installation is not required:
50% — advance payment upon contract signing, guaranteeing production reservation for your order.
50% — upon equipment readiness for shipment from the Moscow warehouse.
Note: Individual payment terms are possible depending on equipment type and delivery timelines. We are always open for discussion!
Assistance in obtaining a subsidy
Details by phone.
Why Choose Us?
- **Individual approach.** We develop unique terms for each client, taking into account business specifics.
- **Transparency.** You will always know the current stage of equipment manufacturing and delivery.
- **Expert support.** Our specialists are ready to answer any questions regarding payment terms, leasing, or subsidies, and can advise on how to maximize the benefits of the deal.
- **Comprehensive assistance.** We handle all documentation processing and coordination tasks so you can focus on developing your business.
Ready to take the first step?
We strive to make the equipment acquisition process as convenient and accessible as possible for you. You can choose the most suitable delivery method from the available options.
1. Pickup from our warehouse
Pickup is a fast and economical option for those who prefer to arrange their own delivery.
You can pick up the equipment from our warehouse at the following address: Moscow, Yuzhnoportovaya St., 21, building 8. Our warehouse is conveniently located, making logistics planning easier.
2. Delivery by our own vehicle
This option is convenient for clients who want to minimize time expenditure and receive equipment "to their doorstep."
We offer delivery to your address using our own vehicles.
Advantages:
- Full control over cargo safety and precise delivery timelines.
- Suitable for all equipment categories, including large-sized and heavy machinery.
- Our specialists will ensure careful loading and delivery.
3. Delivery via Transport Companies
Delivery via transport companies is a reliable and cost-effective way for clients from other regions to receive equipment.
We cooperate with reliable transport companies to deliver your equipment to any country.
Why Choose Us?
- Flexibility. Multiple delivery options allow you to choose the most convenient method based on your needs.
- Transparency. We discuss all delivery terms in advance and formalize them in the contract.
- Reliability. The entire shipping and delivery process is organized professionally, with care for the safety of your equipment.
