Фильтр
Made in Russia
Quick View
This system is a new generation complete thermal spraying unit. It integrates perfectly into modern automated or robotic spray coating systems and provides unchallenged process control, flexibility and highly repeatable spray performance.
$from 894,835
/шт Made in Russia
Quick View
The SPRAYJET-88-EL gun is designed for manual or automated flame spraying of various materials using wire. The gun's distinctive feature is its electric drive, which ensures a uniform and consistent wire feed for both low-melting and high-melting metals, with diameters ranging from 1.6 to 4.76 mm. It can spray materials such as carbon steel, stainless steel, copper, brass, bronze, babbitt, zinc, aluminum, molybdenum, and more. The resulting coatings can have a thickness of 0.05 to 15 mm, with a porosity of 2 to 15%. It is used to restore worn areas and apply corrosion-resistant, wear-resistant, anti-friction, and electrically insulating coatings. This equipment is a complete analogue of the Oerlikon Metco model 12E manual flame spraying systems.
$11,505
/шт Made in Russia
Quick View
The POWDERJET 86 is designed for manual or automated (with the torch mounted on a tripod) powder spraying. Powder is fed to the gun via a separate powder feeder with one or two powder hoppers. Hoppers can be of varying volumes to suit the application. The configuration of this gun, together with the powder feeder, ensures a uniform and constant powder feed and allows spraying in any spatial position at the required feed rate preset on the feeder. It can spray any metallic, self-fluxing, or ceramic powder with wear-resistant, heat-resistant, high-temperature, friction-resistant, and corrosion-resistant properties. This unit is equivalent to the Oerlikon Metco 6PII.
$17,896
/шт Made in Russia
Quick View
The SPRAYJET-87 is a simplified version designed for manual flame spraying of various wire materials. The wire is fed by an air turbine. The gun can spray wires with diameters from 3.17 to 4.76 mm and is only suitable for soft, low-melting wires, such as aluminum, zinc, tin, and babbitt. This equipment is a complete replacement for the Oerlikon Metco Model 11E manual flame spraying system.
$11,505
/шт Made in Russia
Quick View
The POWDERJET 85 is designed for manual powder spraying. This gun is a cost-effective option for small-volume spraying operations or those requiring increased system mobility. A distinctive feature of the POWDERJET 85 is its integrated powder hopper, eliminating the need for an expensive powder feeder. Powder is fed from the hopper using gravity, under the influence of the powder's own weight. It can apply a wide range of coating materials such as self-fluxing alloys, ceramics, metal powders such as steel, stainless steel, bronze, aluminum, etc. This unit is equivalent to Oerlikon Metco 5PII.
$7,670
/шт Made in Russia
Quick View
The RODOJET 9810 is a manual flame spray gun for spraying rods. It can spray rods with diameters from 4.75 mm to 6.35 mm. It is a cost-effective solution for high-quality ceramic, heat-resistant coating spraying. The RODOJET 9810 is unique in that the rod material is completely melted in the flame, ensuring the highest coating quality and preventing unmelted material particles from remaining on the surface of the part. It is suitable for spraying ceramic rods made of chromium oxide (Cr3O2), aluminum oxide (Al2O3), titanium oxide (TiO2), yttria-stabilized zirconia (YSZ), and others. This system is a good alternative to plasma spraying in certain applications.
Price on request
Flame Spray Equipment
In flame spraying, the heat source is a flame generated by the combustion of a combustible gas mixed with oxygen. A sprayable material, in the form of a wire, rod, or powder, is fed into the high-temperature flame zone. It melts, is broken into tiny particles by the gas flow, and is deposited onto the surface of the product.
This method has a relatively low thermal impact on the substrate (between 50 and 150°C), allowing coatings to be applied to a wide range of materials, including plastics, wood, cardboard, and more.
Flame spray torches are made from reliable components, are very easy to operate, and require minimal installation costs. This equipment is most often used for aluminum or zinc spraying, but its overall application range is very wide.
Coating Materials
- Wear-resistant: antifriction materials (babbitts, bronzes), nickel aluminide, nichrome, or coatings containing solid lubricants
- Heat-resistant: (Ni-Al, Ni-Cr, Ni-Cr-Al, Ni-Co-Cr-Al-X, MoSi2) + ceramics with specified porosity
- Corrosion-resistant (Zn, Al, Pb, Cr, Сu, Ti)
- Optical (Co3O4, Сo2O3, Сr2O3, MoSi2)
- Electrically conductive, electrically insulating
- Sealing (Graphite or boron nitride are used as solid lubricants in AC. As the operating temperature increases, aluminum, nickel, nickel aluminide, or zirconium oxide are used as the matrix)
Reviews
